GYS AUTOPULSE 220-M3

CODE: GYSAUTOM3
BRAND: GYS

AUTOPULSE 220-M3

AUTOPULSE 220-M3 is the MIG / MAG pulse generator with 3 integrated wire feeders ideal for car body repairers. Equipped with a digital PFC (Power Factor Correction) the Autopulse supplies pulsed welding quality comparable to three-phase products.

Designed for the highest performance the 220-M3 features several synergic curves which enable exceptional arc quality. The Autopulse 220-M3 is incredibly versatile, 3 welding torches for use with multiple materials including Steel, Aluminium, and Brazing (CuSi3/CuAl8) increase productivity for the modern day workshop.

The intuitive interface and high precision wire feed are ideal for car-body applications with exceptional welding quality even when used with thin sheet materials.

OPTIMISED MIG/MAG SETTINGS

  • Welding processes: Standard, Pulse, Pulse in Pulse, Cold pulse, and Manual.
  • Trigger modes: 2T, 4T, SPOT, DELAY, and TACK function.
  • Precise control over the welding cycle: CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Post gas, etc.
  • 2 specific compartments to isolate and avoid pollution of the aluminum coil:
        - steel wire Ø 0.6 / 0.8 / 1.0 mm (upper compartment n ° 1)
        - stainless steel wire Ø 0.8 / 1.0 mm (upper compartment n ° 1)
        - aluminum wire Ø 0.8 / 1.0 / 1.2 (lower compartment n ° 2)
        - CuSi and CuAl wire Ø 0.8 / 1.0 mm (upper compartment n ° 1)

SIMPLIFIED WELDING

  • 57 (Adjustable) synergic curves ensure an outstanding weld for a large range of materials, wire sizes and gas.
  • The fully synergic mode calculates the optimal welding parameters automatically, this can be also be adjusted (wire speed, voltage and current).

MAXIMUM PRODUCTIVITY

  • 4 microprocessors to give four times the processing power.
  • 3 wheel drive system with 2 active drive rolls.
  • Up to 3 wire reels of Ø 200 mm accepted.
  • Automatic torch detection while pulling the trigger.
  • Balancing arm with torch support (x3) and welding helmet
  • Push pull torch compatibilty (24V)
  • Spool Gun compatibility (ideal for soft wire(AlSi5 / AlSi12)

ERGONOMIC INTERFACE

  • Brand new Interface which has been simplified and centralized with car-body repairer operational habits.
  • Large colour screen for simple control of the welding cycle set up.
  • 2 control knobs and 4 keys for simple and intuitive navigation of the operational menus.
  • Machine and synergies easily updateable via USB key.
  • Save up to 500 welding programs for repetitive tasks.

ROBUST AND MOBILE

  • Reinforced structure.
  • Frame supporting 2 bottles (2x4m3) with low loading height.

gyslink4

GYS AUTOPULSE 220-M3 GYS AUTOPULSE 220-M3 GYS AUTOPULSE 220-M3 GYS AUTOPULSE 220-M3 GYS AUTOPULSE 220-M3 GYS AUTOPULSE 220-M3 GYS AUTOPULSE 220-M3
GYS AUTOPULSE 220-M3
  • Welding quality comparable to 3-phase machines
  • Adjustable welding output between 15 and 220 A
  • 5 welding modes including Cold Pulse
  • Storage for up to 500 welding programs
  • In line with vehicle manufacturers requirements
  • 220V/1ph/20A
  • steel wire Ø 0.6 / 0.8 / 1.0 mm
  • stainless steel wire Ø 0.8 / 1.0 mm
  • aluminum wire Ø 0.8 / 1.0 / 1.2 mm
  • CuSi and CuAl wire Ø 0.8 / 1.0 mm
  • Frame supporting 2 Gas bottles of 4m³ each
  • 1 x AUTOPULSE 220-M3 - 3 TORCHES
  • 1 x G3Si1 / ER7OS-6 STEEL MIG WIRE 0.8MM x 5KG ON A 200MM SPOOL
  • 1 x ALSi 5 ALUMINIUM MIG WIRE 1.0MM x 2KG ON A 200MM SPOOL
  • 1 x MIG WIRE REEL CuSi3 Ø1.0 - 5 D.200 - ERCuSi-A / S Cu6560
  • 2 x ARGON TWIN GAUGE REGULATOR
  • 1 x CLIPSAL 1P 3PIN 15A HD PLUG